Author
|
Topic: Data Acquisition Units
|
shayne31 Senior Member Posts: 7 From:Stoney Creek, ON, Canada Registered: Apr 2005
|
posted April 28, 2005 11:51 AM
We are in the process of investigating a data logger unit replacement for our existing (Fluke NetDaq), and I am curious to find out what other people in the industry are using and what their opinions are. The incoming signals are pretty standard fare: Type J TC, 0-30VDC, 0-10VDC, 4-20mA etc. I would be very interested in hearing your opinions and experiences. Cheers.------------------ 1/10 People Understand Binary, The Other Half Don't. IP: Logged |
Tom C Moderator Posts: 506 From:Brodheadsville, PA USA Registered: Jun 2001
|
posted April 28, 2005 02:50 PM
Check out the information and vendors on this web page; http://www.htservices.com/Links/SignalConditioning/index.htm I have seen National Instrument and Opto 22 installations work out well.
------------------ Best Regards, Tom Cunningham Extrusion Technical Services www.ExtrusionTechnicalServices.com IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|